Getting Ready to Set a Chain Link Post

You have decided to install a fence on your property. The first thing you are going to want to decide is whether you want to hire a fence contractor or install the fence yourself. There are many factors in the decision to hire the project out or install the fence yourself.

Before you begin find your property pins or measure from a plot map that is provided to you from your local government agency. You are also going to need to locate your underground utilities and sprinkler lines. For your underground utilities you can call a locate company, it is usually a free service provided by your local utility company. Once you have established the property lines and located your underground obstructions then now you are ready to mark your post locations.

First you need to determine where you want your gates and what size of gates you are going to need. Most commonly your gate needs will be a walk gate which is usually between three and four feet. Standard sizes or stock sizes, which are what most wholesale fence companies stock, are 36″, 42″ and 48″. If you need a size other than the stock size of the gate, it will usually be a special order. If you have a riding lawn mower a five foot gate will most likely work.

Once you measure for your gate post you can measure your line post. The line posts are the post in-between the end post that are also called the terminals. If you have a 100′ measuring tape it will make the next step a little easier, but a 25′ tape will work. Measure the whole distance of your line and divide the measurement by 10, if it comes out for example to be 8 ten foot sections and a 3 foot sections try taking the number and dividing it evenly so you have 9 evenly spaced sections. You don’t want to have one small section on the end of the line.

Make sure you dig your post against the home first to make sure there is no drainage pipe of footing in your way. If you do find drainage pipe or concrete footing next to your house, you can attach a pressure treated 2×4 to the home. When stringing your fence line drive your stakes in the ground about 18 inches past where you intend to dig your corner post.

2 thoughts on “Getting Ready to Set a Chain Link Post

  1. network security Denver

    I’m not sure the way you made it happen, nonetheless you’ve hit the nail on the head in this post. I actually agree entirely on many of the facts you have presented in this specific material. Thank you so much.

  2. jerry bronstrup

    Content creation can’t be simple for everybody, however you make it look like a piece of cake. I value that you worked so hard to make this information interesting and clear.

Comments are closed.